UNBOX AND SET UP - YOUR GUIDE TO NEW SHOWER UNIT INSTALLATION

Unbox And Set Up - Your Guide To New Shower Unit Installation

Unbox And Set Up - Your Guide To New Shower Unit Installation

Blog Article

This Site



Have you been trying to locate suggestions on How to Build a Shower Enclosure for Your DIY Bathroom?


How to Build a Shower Enclosure for Your DIY Bathroom
A successful shower installation calls for mindful planning and also a lot of job. Most of the times, you will certainly need to do three sorts of tasks: framing wall surfaces, setting up the plumbing, as well as finishing walls.

Prep work


To start with, you need to choose the type of shower that you desire to set up. It is essential to determine whether the picked shower can dealing with particular systems as well as can regulate a safe degree of water with the boiler. A lot of shower systems nowadays are designed to be versatile to different water stress (such as stored warm water as well as cold keys).
It is also important to take into consideration the water pressure and also the preparation of the piping and water drainage for the shower

Different Kinds Of Shower Units


  • Push-on Mixer: The hose pipe and also spray parts of the push-on mixer shower system can be attached to the bath tap according to your need, and the water temperature level can be changed via the faucets. Push-on mixers are cheap as well as extremely straightforward to set up. However, although the pipe connection is straightforward, it is easily removed. Furthermore, it is bothersome to change the temperature.

  • Bath/Shower Mixer: The hose and also spray of this kind of shower are combined with a bathroom mixer faucet, as well as the temperature can be readjusted with the bath faucets. It is a very cheap alternative as well as no extra plumbing is entailed. Nonetheless, the bath/shower mixers also suffer from troublesome temperature control choices.

  • Manual Mixer: The tube as well as spray of a manual mixer shower system are a part of the wall surface unit and also the hot and cold water products are connected to a solitary valve The temperature level and stress of the water are controlled with either one or a selection of knobs (in more costly showers). Although temperature level control is much easier in hand-operated mixer types, they are a lot more expensive than the previously stated mixers. They additionally need added plumbing of hot and cold supply of water pipelines.

  • Thermostatic Mixer: The pipe and spray of this shower type belong of the wall unit as well as the cold and hot water supplies are linked to a solitary valve right here also. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to avoid it from coming to be also warm. Among the biggest advantages of a thermostatic mixer shower type includes convenient temperature control. Nevertheless, it is one of the most costly of the various mixer alternatives.

  • Power Shower: A power shower is a solitary device having a powerful electric pump that is capable of altering both the water pressure and temperature. This type of shower can be fitted if there is water supply from a cold water cistern and a hot water cylinder. A power shower makes the adjustment of both pressure and temperature easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is provided by a combination boiler under keys stress.

  • Electric Shower: An electrical shower is plumbed right into a keys cold water supply and also it warms the water electrically. It is important to keep in mind that for this shower kind to be installed, the mains pressure requires to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The device permits the temperature level and also stress to be readjusted using a handle. Versions with temperature level stabilisers are much better as they continue to be untouched by other taps elsewhere in use within the household. A major downside of electrical showers is that the control handle just permits the option of high temperatures at less pressure, or lower temperature levels at a better stress. This is bothersome in the winter when the spray is commonly weak as well as the mains water is chillier. However, this trouble is dealt with in some models which are available with a winter/summer setup.


  • Technique


    Depending on the sort of shower you want to mount, the shower head need to either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it must have a check shutoff.
    Before beginning, it is recommended to mark the settings of the shower head and control, and also to prepare the pipe-work involved. In addition, the drain system to remove the drainage will need to be intended. Both positions of the wire course as well as the shower switch will certainly likewise require to be thought about if a rapid or electric shower system is being set up.
    Use the guideline overview offered with the shower unit to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is essential to cut off the water. In order to secure the pipes, they should be offered a water resistant covering and also fitted with separating valves. The pipelines can after that be hidden into the wall and also glued over to neaten the overall appearance.
    Fit the base tray, shower head, as well as fittings.
    Attach the primary shower control to the pipes that will certainly be supplying the water (This might need a female screw string adapter).
    Reconnect the supply of water as well as test the pipelines for any leakages, as some may need tightening.
    If you are setting up an electric shower, keep in mind to turn off the electrical power supply prior to making any type of electric connections. As soon as these connections have actually been made (there should be support within the instruction manual), the power supply can be changed back on.

    Readjusting Water Pressure to Match Your Shower


    The cold water reservoir can be raised to a better height (often as little as 150mm (6inches)) by installation a solid wooden assistance under it - potentially made up of struts and blockboards. If you select this alternative, the major and distribution pipelines will certainly additionally have to be raised to satisfy the brand-new elevation of the storage tank.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be attached right into the power supply in order to operate.

    Piping and Drain


    It is best to utilize 15mm size supply pipelines, and also make the go to the shower as short and straight as possible so as to preserve optimal stress and also reduce warmth loss. In addition, by reducing the use of elbows for pipe corners, you can reduce the resistance in the flow of the water system. You can accomplish this by bending the pipes instead.

    A Lot Of Typical Errors


  • Breaching or overlooking neighborhood code constraints.

  • Making use of pipelines that are also tiny.

  • Connecting copper to galvanized without utilizing a brass or dielectric suitable in between both.

  • Not making use of tape or pipeline compound at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not mounting an air void loading for components.

  • Reducing supply stub outs as well short to install the shutoff valves onto after the finished wall remains in area.

  • Not effectively lining up tubing into fittings or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will cause a leak.).

  • When transforming the water back on in your house, constantly run the outside hose valve or purge your commodes to bleed dirt and air from the lines. This particles can create issues in your sink faucets and various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    Simple ways to Install a Shower Cubicle on Your Own

    I'm certainly very curious about How to Install a Direct-to-Stud Shower Enclosure and I am assuming you appreciated our blog posting. Loved our write up? Please share it. Help another person check it out. Thanks a lot for taking the time to read it.




    Customer Reviews


    Report this page